Support for your Pro X3+ Laser Rangefinder (Product #: 202450).
Support for your Pro X3+ Laser Rangefinder (Product #: 202450).
Register your device at bushnellgolf.com/product-registration/. This registration is for receiving Bushnell Golf support, product discounts, and new product information.
Next, install the Bushnell Golf Mobile App on your phone. While not required to operate your laser rangefinder, the app provides added value including...
The Bushnell Golf Mobile App can be found by searching your phone's app store or via the below links.
Open the Bushnell Golf App, create your account, and add your rangefinder as a device by following the on-screen prompts.
While looking through the Bushnell Pro X3+, press and release the Power/Fire button to activate the display. If the display icons and numbers are blurry, rotate the eyepiece in either direction until they focus (see "Adjusting the Eyepiece" below). Next, placing the aiming circle (center of the display) over a target at least 5 yards away, press and hold the Power/Fire button until the "line of sight" distance is displayed near the bottom of the display (see "Display Indicators" below). Crosshairs surrounding the aiming circle indicate that the laser is transmitted. After a range is acquired and displayed, you can release the Power/Fire button. The crosshairs surrounding the aiming circle will disappear once the Power/Fire button is released (i.e., the laser is no longer transmitted).
Once activated, the display will remain visible and display the last distance measurement for 10 seconds. You can press the Power/Fire button again at any time to range to a new target. The maximum time the laser is transmitted (active) is five seconds. To re-fire, press the button down again.
NOTE: once the Pro X3+ has shut off, it will always default back to the last mode used.
Your initial battery should last for a few months. If you start to experience any issues with the performance, replace the battery with a high quality (Panasonic, Duracell, or Energizer), CR-2 3 Volt Lithium battery that is right out of the package. Once you replace the battery, press & hold the fire button for 10 seconds. We recommend carrying at least 1-2 spares in your golf bag so that you always have a fresh new battery for full functionality.
To ensure you are getting the most accurate wind data in your Pro X3+, a quick calibration is required to utilize the wind feature. This is a quick, simple process that can be done while walking to your ball. This video explains how you calibrate the Pro X3+.
The issue you described sounds like your device may have some solar burns. Over time, the device can develop small dots due to sun exposure. The dots are cosmetic and should not affect the actual performance of the device. In some cases, the amount of solar burn has become substantial enough to interfere with the viewing area. In this event, please contact Bushnell Golf Support for options.
Before pairing the Pro X3+ to the Bushnell App, please do the following:
Verify that the Pro X3+ is not paired in your Bluetooth Settings. Some mobile devices will auto-pair to the device, preventing it from pairing via the App. If it is paired, please remove the device from the Bluetooth Settings.
Turn off/on Bluetooth before beginning the pairing process.
The Pro X3+ does not require you to have your phone or the Bushnell App turned on, however to get the full benefit of the Elements function, please connect the Pro X3+ to the Bushnell App prior to playing your round. The Bushnell App makes adjusting settings easier, plus you can save rounds and statistics.
To compare the Pro X3+ to another rangefinder, turn off the Elements mode. There may still be slight differences, based on the Pro X3+'s next generation laser engine, but they should be similar. With Elements turned on, and having set your Home Elevation to where you play most often, the Pro X3+ will provide the most accurate compensated distance.
The Pro X3+ uses the next generation of laser technology, allowing the laser beam to capture the pin faster than previous models. In this case, the distance is displayed, but no JOLT indication will be provided because more than one object was not acquired. You can verify the distance to the pin (and get the JOLT feedback) by continually pressing the Power/Fire button and sweeping to the pin. This forces the Pro X3+ to hit the background objects, then hit the pin, which should be closest object recognized by the laser.
Bushnell Golf guarantees the Pro X3+ Laser Rangefinder to be free of defects in materials and workmanship for two years from the date of purchase. This warranty does not cover consumer-caused damages such as misuse, abuse or repairs attempted by someone other than our authorized technicians.
Yes, the Pro X3+ is manufactured and tested to withstand water exposure up to IPX7 standards. It is waterproof, submersible to a depth of 1 meter for up to 30 minutes.
Yes, follow these steps.
Replace the battery when the unit does not turn on, display does not illuminate, or the display goes blank when attempting to power the laser. Use a good quality 3 -volt lithium battery (CR2). Insert into the compartment with the negative (flat) end first (positive end facing out towards the battery cover). We recommend replacing the battery at least once every six months.
PRECISION PERFECTED WITH THE PRO X3+
The Pro X3+ provides wind speed and direction, along with the best compensated distances available, to give golfers an unmatched combination of accuracy and performance.
HOW TO CALIBRATE THE PRO X3+
To ensure you are getting the most accurate wind data in your Pro X3+, a quick calibration is required to utilize the wind feature. This is a quick, simple process that can be done while walking to your ball. This video explains how you calibrate the Pro X3+.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nunc id turpis rhoncus.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nunc id turpis rhoncus.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nunc id turpis rhoncus.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nunc id turpis rhoncus, blandit dui quis, tincidunt lorem. Cras scelerisque aliquam congue. Suspendisse potenti. Aliquam quis sem eget nulla lobortis laoreet. Curabitur id consectetur ipsum. Nulla at bibendum lectus, quis gravida est. Nam ut efficitur tellus, quis vulputate arcu.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nunc id turpis rhoncus, blandit dui quis, tincidunt lorem. Cras scelerisque aliquam congue. Suspendisse potenti. Aliquam quis sem eget nulla lobortis laoreet. Curabitur id consectetur ipsum. Nulla at bibendum lectus, quis gravida est. Nam ut efficitur tellus, quis vulputate arcu.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nunc id turpis rhoncus, blandit dui quis, tincidunt lorem. Cras scelerisque aliquam congue. Suspendisse potenti. Aliquam quis sem eget nulla lobortis laoreet. Curabitur id consectetur ipsum. Nulla at bibendum lectus, quis gravida est. Nam ut efficitur tellus, quis vulputate arcu.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Maecenas pharetra nisl quis viverra egestas. Phasellus nec lacinia sapien, vel fringilla est. Interdum et malesuada fames ac ante ipsum primis in faucibus.
LET US KNOW